![]() ![]() So has anyone burnt a stove such as the Cemi II? & if so how did it perform as a direct install?Smokey? Lots of heat? Burns alot of wood? Cemi Wood Stove Parts Also I would be using the stove 2 - 3 times a week when it gets really cold, not 24 - 7 as the previous owner did. Also I have a source for the ECO Wood Bricks & would burn probably half Eco bricks & half dry well seasoned wood, to help keep my creosote deposits to a minimum. Removing the stove is no problem as it has that great nifty roller device attached. I would also Pull the stove out to clean once a season as he did. So I was planning to just direct install & burn it the same way way that the previous owner did. I have a 25 foot interior walled clay lined chimney that draws awesome & is in excellent condition with a new cement cap I wouldn't mind installing a 6 inch boot ontop of the stove, but appears that it would be a difficult fab up, as the 10 -12 stainless steel burn tubes come up thru the top of the stove & the damper is ontop of that. Stove is made as a direct slide in - open up your fireplace damper & start burning wood. In the morning stove would have a large hot bed of coals & could easily be reloaded. Stove was burnt the following way year after year - get stove up to temp, shut down the air flow to just about 3/4 closed, shut down the damper & get stove into secondary burn mode & keep it loaded for the overnight burn. This stove is a very well made unit & can burn a 24 inch log- ( even comes with a heavy duty adjustable roller welded on at the rear of the stove for easy maneuvering) - has dual fans with a rheostat control - adjustable air dampers on each side & a main damper control, which really only has 2 positions - opened or partially closed. I need a owners manual or installation instructions for a job I need to do. Post in 'Classic Wood Stove Forums (prior to approx. Forums Wood Stoves, Pellet Stoves, Chimneys and more. Wood Stove Repair with A-1 replacement parts is as easy as 1, 2, 3 All we need are a few important items to get your wood burner fired up again. His chimney was probably 16 foot & located on an outside north wall. It was used heavily by the previous owner, who operated this stove inside a heatilator, which was surrounded by a full masonry fireplace & chimney. It does have secondary burn capabilities & a 3rd level combustion via its environmental damper, giving this stove true tri level combustion capability. Now this stove appears quite advanced for its time period. I received the manual & the original sales flyers with the stove. ![]() ![]() Stove is probably 20 years old & is in excellent condition. I just purchased this great stove from someone who is moving to a warmer clime. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |